Installation Manual

Menu Information
9000X AF Drives MN04001004E—May 2011 www.eaton.com 39
Keypad Settings (S5.6)
There are five parameters (Default Page to Backlight Time)
associated with the keypad operation:
P5.6.1
Default Page
Default: 0
Default page
This parameter sets the view to which the display automatically moves as the Timeout Time expires or when the keypad power is switched
on. If the default page value is 0, this function is not activated, that is, the last displayed page remains on the keypad display.
P5.6.2
Default Page in
the Operating
Menu
Default page/OM
Here you can set the location in the operating menu to which the display automatically moves as the set Timeout Time expires, or when
the keypad power is switched on. See setting of Default Page parameter above.
P5.6.3
Timeout Time
Range: 0–65,535
Units: Seconds
Default: 30
Timeout time
The Timeout Time setting defines the time after which the keypad display returns to the Default Page.
Note: If the Default Page value is 0, the Timeout Time setting has no effect.
P5.6.4
Contrast
Adjustment
Contrast adjustment
If the display is not clear, you can adjust the keypad contrast with this parameter.
P5.6.5
Backlight Time
Range: 1–65,535 or Forever
Units: Minutes
Default: 10
Backlight time
This parameter determines how long the backlight stays on before going out. You can select any time between 1 and 65,535 minutes or
“Forever”.