Installation Manual

Menu Information
9000X AF Drives MN04001004E—May 2011 www.eaton.com 37
System Menu Parameters
System Menu Copy Parameter Options (S5.3)
The parameter copy function is used when the operator
wants to copy one or all parameter groups from one drive to
another. All the parameter groups are first uploaded to the
keypad, the keypad is connected to another drive and the
parameter groups are downloaded to it (or possibly back to
the same drive).
Note: Before any parameters can be successfully copied
from one drive to another, the drive must be stopped
when the parameters are downloaded to it.
S5.1
Language
Selection
Range: English, Spanish, French, Portuguese Default: English
Language
This parameter offers the ability to control the SVX9000/SPX9000 through the keypad in the language of your choice. Available languages
are: English, Spanish, French, and Portuguese.
S5.2
Application
Selection
Default: Basic
Application
This parameter sets the active application.
When changing applications, you will be asked if you want the parameters of the new application to be uploaded to the keypad. If you wish
to load the new application parameters, push the ENTER button. Pushing any other button saves the parameters of the previously used
application in the keypad.
S5.3.1
Parameter Sets
Parameter Sets
This parameter allows you to reload the factory default parameter values, and to store and load two customized parameter sets.
S5.3.2
Upload to
Keypad
Up to keypad
This function uploads all existing parameter groups to the keypad.
S5.3.3
Download from
Keypad
Range: 0–3 Default: 0 (All parameters)
Down from keypad
This function downloads one or all parameter groups from the keypad to the drive.
0 All parameters
1 All, no motor
2 Application parameters
S5.3.4
Automatic
Backup
Range: Yes, No Default: Yes
Auto.backup
This parameter activates and deactivates the parameter backup function. When the parameter backup function is activated, the keypad
makes a copy of the parameters and settings in the currently active application. When applications are changed, you will be asked if you
wish the parameters of the new application to be uploaded to the keypad. For this to happen, push the ENTER button. If you wish to keep
the copy of the parameters of the previously used application saved in the keypad, push any other button.
Note: Parameters saved in the parameter settings of S5.3.1 will be deleted when applications are changed. If you want to transfer the
parameters from one application to another, you have to upload them to the keypad first.