Firmware Manual

9000X AF Drives
6-18 For more information visit: www.eaton.com
MN04004001E
August 2010
Multi-Purpose Control Application
Analog Output 2 (Control Keypad: Menu M1 ➔ G1.3.6)
Table 6-19: Analog Output 2 Parameters — G1.3.6
Analog Output 3 (Control Keypad: Menu M1 ➔ G1.3.7)
Table 6-20: Analog Output 3 Parameters — G1.3.7
Code Parameter Min. Max. Unit Default Cust ID Note
P1.3.6.1

Analog output 2
signal selection
AnOUT:0.1 AnOUT:E.10 0.1 471
P1.3.6.2 Analog output 2
function
0 13 4 472 See par. 1.3.5.2
P1.3.6.3 Analog output 2
filter time
0.00 10.00 s 1.00 473 0 = No filtering
P1.3.6.4 Analog output 2
inversion
0 1 0 474 0 = Not inverted
1 = Inverted
P1.3.6.5 Analog output 2
minimum
0 1 0 475 0 = 0 mA
1 = 4 mA
P1.3.6.6 Analog output 2
scale
10 1000 % 100 476
P1.3.6.7 Analog output 2
offset
-100.00 100.00 % 0.00 477
Code Parameter Min. Max. Unit Default Cust ID Note
P1.3.7.1 Analog output 3
signal selection
AnOUT:0.1 AnOUT:E.10 0.1 478
P1.3.7.2 Analog output 3
function
0 13 5 479 See par. 1.3.5.2
P1.3.7.3 Analog output 3
filter time
0.00 10.00 s 1.00 480 0 = No filtering
P1.3.7.4 Analog output 3
inversion
0 1 0 481 0 = Not inverted
1 = Inverted
P1.3.7.5 Analog output 3
minimum
0 1 0 482 0 = 0 mA
1 = 4 mA
P1.3.7.6 Analog output 3
scale
10 1000 % 100 483
P1.3.7.7 Analog output 3
offset
-100.00 100.00 % 0.00 484