Firmware Manual

9000X AF Drives
MN04004001E
For more information visit: www.eaton.com
6-15
August 2010
Multi-Purpose Control Application
Digital Output Signals (Control Keypad: Menu M1 ➔ G1.3.3)
Table 6-16: Digital Output Signals — G1.3.3
Code Parameter Min. Max Unit Default ID Note
P1.3.3.1

Ready DigOUT:0.1 DigOUT:E.10 DigOUT:A.1 432 Ready to run
P1.3.3.2

Run DigOUT:0.1 DigOUT:E.10 DigOUT:B.1 433 Running
P1.3.3.3

Fault DigOUT:0.1 DigOUT:E.10 DigOUT:B.2 434 Drive in fault state
P1.3.3.4

Inverted fault DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 435 Drive not in fault state
P1.3.3.5

Warning DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 436 Warning active
P1.3.3.6

External fault DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 437 External fault active
P1.3.3.7

Reference fault/warning DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 438 4 mA fault active
P1.3.3.8

Overtemperature
warning
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 439 Drive overtemperature
active
P1.3.3.9

Reverse DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 440 Output frequency < 0 Hz
P1.3.3.10

Unrequested direction DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 441 Reference <> Output
frequency
P1.3.3.11

At speed DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 442 Reference = Output
frequency
P1.3.3.12

Jogging speed DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 443 Jogging or preset speed
command active
P1.3.3.13

Remote control DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 444 IO control active
P1.3.3.14

External brake control DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 445 See explanations on
Page 8-46
P1.3.3.15

External brake control
inverted
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 446 See explanations on
Page 8-46
P1.3.3.16

Output frequency limit 1
supervision
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 447 See ID315
P1.3.3.17

Output frequency limit 2
supervision
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 448 See ID346
P1.3.3.18

Reference limit
supervision
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 449 See ID350
P1.3.3.19

Temperature limit
supervision
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 450 See ID354
P1.3.3.20

Torque limit supervision DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 451 See ID348
P1.3.3.21

Motor thermal
protection
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 452
P1.3.3.22

Analog input
supervision limit
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 463 See ID356
P1.3.3.23

Motor regulator
activation
DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 454
P1.3.3.24

Fieldbus input data 1 DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 455 FB CW B11
P1.3.3.29 Safe Disable DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 1680
P1.3.3.30 ChargeSwState DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 1681
P1.3.3.25

Fieldbus input data 2 DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 456 FB CW B12
P1.3.3.26

Fieldbus input data 3 DigOUT:0.1 DigOUT:E.10 DigOUT:0.1 457 FB CW B13