Firmware Manual

9000X AF Drives
MN04004001E
For more information visit: www.eaton.com
3-1
August 2010
Chapter 3 — Local/Remote Control Application
Introduction
Select the Local/Remote Control Application in menu M5. See Chapter 5 of the 9000X AF
Drives User Manual.
● The Local/Remote Application utilizes digital input DIN6 to select between Local and
Remote control. For each control location, the frequency can be selected from either
the keypad, I/O terminals, or fieldbus.
● All outputs are freely programmable.
Additional functions:
● Programmable Start/Stop and Reverse signal logic
● Second I/O programmable stay/stop and reverse signal logic
● Reference scaling
● One frequency limit supervision
● Second ramps and S-shape ramp programming
● Programmable start and stop functions
● DC-brake at stop
● One skip frequency area
● Programmable v/f curve and switching frequency
● Autorestart
● Motor thermal and stall protection: Programmable action; off, warning, fault
The parameters of the Local/Remote Control Application are explained in Chapter 8 of
this manual. The explanations are arranged according to the individual ID number of
the parameter.