Firmware Manual

9000X AF Drives
8-74 For more information visit: www.eaton.com
MN04004001E
August 2010
Description of Parameters
1003 Stop frequency, auxiliary
drive 1
7 (P1.9.3)
The frequency of the drive controlled by the frequency converter must fall with 1 Hz
below the limit defined with these parameters before the auxiliary drive is stopped.
The stop frequency limit also defines the frequency to which the frequency of the
drive controlled by the frequency converter is dropped after starting the auxiliary
drive. See Figure 8-54.
1004 Start frequency, auxiliary
drive 2
7 (P1.9.4)
1005 Stop frequency, auxiliary
drive 2
7 (P1.9.5)
1006 Start frequency, auxiliary
drive 3
7 (P1.9.6)
1007 Stop frequency, auxiliary
drive 3
7 (P1.9.7)
1008 Start frequency, auxiliary
drive 4
7 (P1.9.8)
1009 Stop frequency, auxiliary
drive 4
7 (P1.9.9)
See ID1002 and ID1003.