Firmware Manual

9000X AF Drives
MN04004001E
For more information visit: www.eaton.com
2-1
August 2010
Chapter 2 — Standard Application
Introduction
Select the Standard Application in menu M5. See Chapter 5 of the 9000X AF Drives
User Manual.
The Standard Application is typically used in pump and fan applications and conveyors
for which the Basic Application is too limited but where no special features are needed.
● The Standard Application has the same I/O signals and the same control logic as the
Basic Application.
● Digital input DIN3 and all the outputs are freely programmable.
Additional functions:
● Programmable Start/Stop and Reverse signal logic
● Reference scaling
● One frequency limit supervision
● Second ramps and S-shape ramp programming
● Programmable start and stop functions
● DC-brake at stop
● One skip frequency area
● Programmable V/f curve and switching frequency
● Autorestart
● Motor thermal and stall protection: Programmable action; off, warning, fault
The parameters of the Standard Application are explained in Chapter 8 of this manual.
The explanations are arranged according to the individual ID number of the parameter.