Firmware Manual

9000X AF Drives
8-46 For more information visit: www.eaton.com
MN04004001E
August 2010
Description of Parameters
437

External fault or warning 67 (P1.3.3.6, P1.3.1.6)
Fault or warning depending on ID701.
438

Reference fault or warning 67 (P1.3.3.7, P1.3.1.7)
Fault or warning depending on ID700.
439

Overtemperature warning 67 (P1.3.3.8, P1.3.1.8)
The heatsink temperature exceeds +70°C.
440

Reverse 67 (P1.3.3.9, P1.3.1.9)
The Reverse command has been selected.
441

Unrequested direction 67 (P1.3.3.10, P1.3.1.10)
Motor rotation direction is different from the requested one.
442

At speed 67 (P1.3.3.11, P1.3.1.11)
The output frequency has reached the set reference.
443

Jogging speed 67 (P1.3.3.12, P1.3.1.12)
Jogging speed selected.
444

External control place 67 (P1.3.3.13, P1.3.1.13)
Control from I/O terminal selected (Menu M2; ID125).
445

External brake control 67 (P1.3.3.14, P1.3.1.14)
External brake ON/OFF control with programmable delay.
446

External brake control, inverted 67 (P1.3.3.15, P1.3.1.15)
External brake ON/OFF control; Output active when brake control is OFF.
447

Output frequency limit 1
supervision
67 (P1.3.3.16, P1.3.1.16)
The output frequency is outside the set supervision low limit/high limit (see ID315
and ID316).
448

Output frequency limit 2
supervision
67 (P1.3.3.17, P1.3.1.17)
The output frequency is outside the set supervision low limit/high limit (see ID346
and ID347).