Firmware Manual

9000X AF Drives
8-40 For more information visit: www.eaton.com
MN04004001E
August 2010
Description of Parameters
Figure 8-36: Joystick Hysteresis with Minimum Frequency at 35 Hz
386 AI1 sleep delay 6 (P1.2.2.10)
This parameter defines the time the analog input signal has to stay under the Sleep
limit determined with parameter ID385 in order to stop the frequency converter.
388

AI2 signal selection 234567 (P1.2.9, P1.2.21, P1.2.3.1)
Connect the AI2 signal to the analog input of your choice with this parameter. For
more information about the TTF programming method, see Page 6-3.
Frequency reference
Hz
Reference
Scaling Max
P2.2.2.7 = 70 Hz
Max Freq. P2.1.2
= 50 Hz
Min Freq. P2.1.1 =
Ref. Scaling Min
P2.2.2.6 = 0 Hz
Par. 2.2.2.4
= 20%
Par. 2.2.2.5
= 90%
Joystick Hysteresis,
P2.2.2.8 = 20%
REVERSE
50%
FORWARD
50%
From Reverse to Forward
From Forward to Reverse
Analog
Input (V/mA)
(0 – 10V/20 mA)
A
B