Firmware Manual

9000X AF Drives
8-34 For more information visit: www.eaton.com
MN04004001E
August 2010
Description of Parameters
Figure 8-30: Place B Start Forward/Start Reverse
Figure 8-31: Place B Start, Stop, Reverse
363 Start/Stop logic selection,
place B
3 (P1.2.15)
0 DIN4: closed contact = start forward
DIN5: closed contact = start reverse

The first selected direction has the highest priority.
 When the DIN4 contact opens the direction of rotation starts to change.
 If Start forward (DIN4) and Start reverse (DIN5) signals are active
simultaneously, the Start forward signal (DIN4) has priority.
1 DIN4: closed contact = start — open contact = stop
DIN5: closed contact = reverse — open contact = forward
See Figure 8-31.
FWD
REV
DIN4
DIN5
t
Output
Frequency
Stop Function
(ID506) = Coasting
1 2 3
FWD
REV
DIN4
DIN5
Output
Frequency
Stop Function
(ID506) = Coasting
t