Firmware Manual

9000X AF Drives
MN04004001E
For more information visit: www.eaton.com
8-23
August 2010
Description of Parameters
Figure 8-18: AI1 No Signal Inversion
Figure 8-19: AI1 Signal Inversion
323 AI1 signal inversion 3457 (P1.2.7, P1.2.19, P1.2.2.6)
If this parameter = 0 no inversion of analog V
in
signal takes place.
Note: In Application 3, AI1 is place B frequency reference if parameter
ID131 = 0 (default).
If this parameter = 1 inversion of analog signal takes place.
max. AI1 signal = minimum set speed
min. AI1 signal = maximum set speed
Output
Frequency
ID303
ID304
0
100%
AI1
(Term. 2)
ID322ID321
ID320 = 0
AI1 = 0 – 100%
ID320 = 1
AI1 = Custom
Output
Frequency
ID303
ID304
0
100%
AI1
(Term. 2)
ID322
ID321
ID320 = 0
AI1 = 0 – 100%
ID320 = 1
AI1 = Custom