Firmware Manual

9000X AF Drives
8-16 For more information visit: www.eaton.com
MN04004001E
August 2010
Description of Parameters
Figure 8-11: Reference Inversion
Figure 8-12: Reference Filtering
305 Reference inversion 2 (P1.2.6)
Inverts reference signal: Max. ref. signal = Min. set freq.
Min. ref. signal = Max. set freq.
0 No inversion
1 Reference inverted
306 Reference filter time 2 (P1.2.7)
Filters out disturbances from the incoming analog V
in
signal. A long filtering time
makes regulation response slower.
307 Analog output function (P1.16, P1.3.2, P1.3.5.2, P1.3.3.2)
This parameter selects the desired function for the analog output signal. See the
specific parameters for the values available in each respective application.
Output
Frequency
Max. Freq. ID102
Min. Freq. ID101
ID303
ID304
0
Max.
Analog
Input
Unfiltered Signal
Filtered Signal
%
100%
63%
t [s]
ID306