Firmware Manual

9000X AF Drives
MN04004001E
For more information visit: www.eaton.com
1-1
August 2010
Chapter 1 — Basic Application
Introduction
The Basic Application is easy to use with a minimum number of parameters. It operates like
the default setup of the Standard Application. It is the default setting on delivery from the
factory. If any configuration changes are needed, select the Standard Application in menu
M5. Fieldbus control is not available in the Basic Application, but fieldbus monitoring is the
same as the Standard Application.
The parameters of the Basic Application are explained in Chapter 8 of this manual. The
explanations are arranged according to the individual ID number of the parameter.
Motor Protection Functions in the Basic Application
The Basic Application provides almost all the same protection functions as the other
applications:
● External fault protection
● Input phase supervision
● Undervoltage protection
● Output phase supervision
● Earth fault protection
● Motor thermal protection
● I
in
reference fault (auto reset)
Unlike the other applications, the Basic Application does not provide any parameters for
choosing the response function or limit values for the faults. The motor thermal protection
is explained in more detail on Page A-4 in Appendix A.