Firmware Manual

9000X AF Drives
MN04004001E
For more information visit: www.eaton.com
7-27
August 2010
Pump and Fan Control Application
Menus — M3 to M6
Menus M3 to M6 provide information on the Active Faults, Fault History, System Menu
settings and the Expander Board setup. These menu items are explained in detail in
Chapter 5 of the 9000X AF Drives User Manual.
Monitoring Menu — M7
The monitored items are the actual values of parameters and signals as well as the
status and measurements of other elements. Monitored items cannot be edited.
See the 9000X AF Drives User Manual, Chapter 5 — Menu information item M7, for
more information.
Note: Local control is always frequency control mode unless PID is selected for the local
reference. In remote, frequency mode is selected with DIN6 unless PID is selected for
the remote reference. PC Control is always frequency mode.