Cut Sheet

3
Technical Data TD01005006E
Effective August 2009
Eaton’s SPD Series for integration into
electrical distribution equipment
EATON CORPORATION www.eaton.com
Feature package options
The SPD Series provides users with the option of selecting between
three feature packages. These feature packages are the basic,
standard, and standard with surge counter. The proper feature
package can be selected based on the requirements of the
application or specification.
Table 1. Feature Package Comparison
Feature Basic Standard
Standard
with Surge
Counter
Surge protection using thermally
protected MOV technology
✔✔✔
Dual-colored protection status indicators
for each phase
✔✔✔
Dual-colored protection status indicators
for the neutral-ground protection mode
✔✔✔
Audible alarm with silence button
✔✔
Form C relay contact
✔✔
EMI/RFI filtering, providing up to 50 dB of
noise attenuation from 10 kHz to 100 MHz
✔✔
Surge counter with reset button
✔
Remote display mounting option
The SPD Series offers the option of mounting its display remotely
from the device. This is useful for applications where OEMs or other
integrators would like to embed the unit within a piece of equipment
and still be able to view its display.
SPD Series unit catalog numbers ending with ‘B’ (refer to catalog
number configuration on Page 7) should be ordered for applications
where the display is to be mounted remotely. These units include
the SPD Series unit and the remote display panel.
In addition to the unit itself, a remote display cable will have to be
purchased. Remote display cables are available in 4, 8, and 12 foot
lengths.
Table 2. Remote Display Cables
Description Catalog Number
4 ft remote display cable
8 ft remote display cable
12 ft remote display cable
SPDRDCAB04
SPDRDCAB08
SPDRDCAB12
ote: N Integrated units factory-installed with Eaton switchgear assemblies do
not require the purchase of a remote display cable. The cable is provided and
all required mounting is performed at the factory.
Existing SPD Series units previously installed without a remote
display also have the capability of mounting their displays remotely
from the device. Complete remote display kits are available that
contain all items required to mount the display remotely, including
the remote display cable. Remote display kits are available in 4, 8,
and 12 foot cable length options.
Table 3. Remote Display Kits
Description Catalog Number
Remote display kit with 4 ft remote display cable
Remote display kit with 8 ft remote display cable
Remote display kit with 12 ft remote display cable
SPDRDKIT04
SPDRDKIT08
SPDRDKIT12
For the dimensions of the cutout required to accommodate the
remote display panel, see Figure 1 below.
Dimensions
Figure 1. Dimensions of the Cutout Required to Accommodate
the Optional Remote Display Panel
2.69 (68.3)
5.38 (136.7)
8.90
(226.1)
4.45
(113.0)
4x R0.06 (1.6)
2.53 (64.3)
5.06 (128.6)
6x 0.13 (3.3)
9.38
(238.3)
4.69
(119.1)