Cut Sheet

ManualsBrandsEaton ManualsPanelsSPD series surge protection device

Technical Data TD01005025E

Effective June 2010

Eaton’s SPD Series for mounting external to

electrical distribution equipment

EATON CORPORATION www.eaton.com

Speciﬁcations

Table 42. SPD Series Specifications

Description Specification

Surge capacity ratings available 50, 80, 100, 120, 160, 200, 250, 300, 400 kA per phase

Nominal discharge current (I

) 20 kA

Short-circuit current rating (SCCR) 200 kA

SPD type Basic feature package = Type 1 (can also be used in Type 2 applications)

Standard and Standard with Surge Counter feature packages = Type 2

Single split phase voltages available 120/240

Three-phase wye system voltages available 120/208, 127/220, 230/400, 277/480, 347/600

Three-phase delta system voltages available 240, 480, 600

Input power frequency 50/60 Hz

Power consumption (basic units):

208Y, 220Y, 240S, 240D, and 240H voltage codes

400Y, 480Y, and 480D voltage codes

600Y and 600D voltage codes

0.5W

1.1W

1.3W

Power consumption (standard and standard with surge counter units):

208Y, 220Y, 240S, 240D, and 240H voltage codes

400Y, 480Y, and 480D basic voltage codes

600Y and 600D voltage codes

0.6W

1.7W

2.1W

Protection modes Single split phase . . . . . . . . . . . L-N, L-G, N-G, L-L

Three-phase wye . . . . . . . . . . . L-N, L-G, N-G, L-L

Three-phase delta . . . . . . . . . . . L-G, L-L

Three-phase high-leg delta . . . . L-N, L-G, N-G, L-L

Maximum continuous operating voltage (MCOV):

240S, 208Y, 220Y, and 240H MCOV

400Y and 480Y MCOV

600Y MCOV

240D MCOV

480D MCOV

600D MCOV

150 L-N, 150 L-G, 150 N-G, 300 L-L

320 L-N, 320 L-G, 320 N-G, 640 L-L

420 L-N, 420 L-G, 420 N-G, 840 L-L

320 L-G, 320 L-L

640 L-G, 640 L-L

840 L-G, 840 L-L

Ports 1

Operating temperature –40°F through 122°F (–40°C through 50°C)

Operating humidity 5% through 95%, noncondensing

Operating altitude Up to 16,000 ft (5000m)

Seismic withstand capability Meets or exceeds the requirements specified in IBCT 2006, CBC 2007, and UBCT Zone 4

Enclosure dimensions and weights

Refer to Figures 1–7 for enclosure dimensions and weights

Form C relay contact ratings 150 Vdc or 125 Vac, 1A maximum

Form C relay contact logic Power ON, normal state—NO contact = open, NC contact = closed

Power OFF or fault state—NO contact = closed, NC contact = open

EMI/RFI filtering attenuation Up to 50 dB from 10 kHz to 100 MHz

Agency certifications and approvals UL 1449 3rd Edition listed device; CSA listed

UL 1283 (Type 2 SPDs only)

Warranty 10 years