Specifications
9
Instruction Booklet IB158002EN
Effective October 2014
Eaton SPD Max Series
Surge Protective Device
EATON www.eaton.com
5.0 Specications
Table 4. Specifications
Description Specification
Surge current capacity per phase 100, 120, 160, 200, 250, 300, 320, 400, 600, 800 kA ratings available
Nominal discharge current (In) 20kA
Short circuit current rating (SCCR) 200kA
SPD Type Basic feature package = Type 1 (can also be used in Type 2 applications)
Standard with Surge Counter feature package = Type 2
Enclosure Types NEMA 4, NEMA 4X Enclosure
Circuit Breaker - 30 Amp Eaton Catalog Number: FDC3030L
Circuit Breaker Load and Line
Terminal Torque Specifications
#10AWG 35 Lb-in; #8AWG 40Lb-in; #6 - #4AWG 45 Lb-in; #3 - I/0 AWG 50 Lb-in. (SPD Max Wire Range #10 - 1/0 AWG)
Standard split phase voltages available 120/240
Single phase 230
Three phase wye system voltages available 120/208, 127/220, 230/400, 277/480, 347/600
Three phase delta system voltages 240, 480, 600
Three phase high leg delta system voltages 120/240 high leg phase wire will be identified with a tag from the factory.
Input Power Frequency 50/60 Hz
Power consumption (Standard with Surge Counter units)
208Y, 220Y, 230L, 240S, 240D, and 240H voltage codes 0.6W
400Y, 480Y, and 480D Basic voltage codes 1.7W
600Y and 600D voltage codes 2.1W
Protection modes Single split phase L-N, L-G, N-G, L-L, Single phase L-N, L-G, N-G, Three phase delta..L-G, L-L , Three phase Wye.L-N,
L-G, N-G, L-L, Three phase high leg delta L-N, L-G, N-G, L-L
Maximum continuous operating voltage (MCOV)
230V Single Phase 320V L-N, 320V L-G, 320V N-G
127V/220V WYE, 120V/240V Single Split Phase 150V L-N, 150V L-G, 150V N-G, 300V L-L
120V/240V Hi Leg 150V L-N, 150V L-G, 150V N-G, 300V L-L, 320V H-N, 320V H-G, 470V H-L
230V/400V WYE, 277/480V WYE 320V L-N, 320V L-G, 320V N-G, 640V L-L
347V/600V WYE 420V L-N, 420V L-G, 420V N-G, 840V L-L
240V DELTA 300V L-G, 300V L-L
480V DELTA 640V L-G, 640V L-L
600V DELTA 840V L-G, 840V L-L
Ports 1 or 2
Operating temperature & humidity -20 through 50° C (-4 through 122° F), 5% through 95%, non-condensing
Storage temperature -20 through 50° C (-4 through 122° F)
Operating Altitude Up to 16,000 ft (5000m)
Weight Not to exceed 52 lbs
Form C relay contact ratings Max 0.46 A, 150 Vac, 1A, 30 Vdc
Form C terminal block ratings Rated 300V, 16A, 30-12 AWG solid or stranded wire. Torque range 5-7 lbs-in
Form C relay contact logic Power on, normal state - NO contact = OPEN, NC contact = CLOSED Power off, fault state, - NO contact = CLOSED,
NC contact = OPEN
EMI/RFI filtering attenuation (Standard With Surge Counter) Up to 50 dB from 10 kHz to 100 MHz
Standards / Agency Certifications UL1449 Edition 3 – Std for Surge Protective Devices
UL1283 Edition 5 – Std for EMI Filters (Type 2 SPDs only)
CSA Electrical Notice NO. 516 Edition 1 – Surge/Transient Voltage Suppressor (excludes 230L voltage code)
CSA 22.2 NO. 8-M1986 Edition 4 – EMI Filters
Warranty 15 years from the date of delivery to the purchaser, 20 years if the product is properly registered at www.eaton.com/
spd
RoHS Compliant Yes