Product Brochure
Designed specifically for
service upgrades:
• Shortened/Stacked
Neutrals allow existing
ground and neutral
wires to be terminated
without wire nuts.
• Exclusive, Factory
Installed Five-Circuit
Terminal Block can be
field adjusted to the right
hand corner of the
loadcenter.
• Silver plated copper
bus for superior
conductivity
• 25 kAIC Commercial
Grade Main Breaker
• Provision for a Second
Terminal Block
• CH Breakers
trip to “off” for ease
of operation for
homeowners
Renovation Loadcenter –
Quick and Clean Installation
Designed specifically for
the service contractor, this is
the only renovation line in
the industry.
• Builds upon the platform of
excellence achieved with
the CH Loadcenter.
• Features a patent-pending
five-circuit terminal block
that is factory mounted
in the top left corner of
the loadcenter.
• Terminal Block is field-
adjustable to meet onsite
needs and can be doubled-
up to provide access to
ten circuits.
• No need for expensive and
frustrating wire nuts.
• Uses CH branch breakers.
• The twin-stacked, neutral
design places the neutral
and ground terminations
higher in the loadcenter.
Industry Exclusive
Conventional Loadcenter
Upgrade
Cutler-Hammer Renovation
Loadcenter Upgrade
We heard you!
After much input from
service contractors, we’ve
developed an easier,
safer, and neater renova-
tion loadcenter. Reflecting
your needs and reducing
your inventory costs,
these panels and accesso-
ries are proving worth-
while for contractors
tapped into the renova-
tion market.
Manufacturing Practical
Products for the Contractor
SINGLE-PHASE —MAIN CIRCUIT BREAKER RENOVATION LOADCENTERS
25,000A INTERRUPTING CAPACITY
Single-Phase, 3-Wire – 120/240V AC – Factory Bonded Stacked Split Neutral
Main Main Maximum Enclosure Box Wire Size Catalog Cover Catalog Numbers Drywall Bracket
Type Ampere Number Type Size Range Cu/AI Number Flush Surface
Breaker Rating Circuit 60°C or 75°C
for Main
Breaker
CH 100 22 Indoor C #4-1/0 CH22B100CRN CH8CF CH8CS CH8JFC1926
(10 kAIC)
CSR 150 32 Indoor J #2-300 kcmil CH32B150JRN CH8JF CH8JS CH8JFC1939
CSR 200 32 Indoor J #2-300 kcmil CH32B200JRN CH8JF CH8JS CH8JFC1939
CSR 200 42 Indoor K #2-300 kcmil CH42B200KRN CH8KF CH8KS CH8KFC1942
Note: All main circuit breaker loadcenters are listed for use as service entrance equipment. Loadcenters are factory bonded for service entrance applications. Remove bonding strap for separate neutral and ground bars for
sub-feed applications.
Renovation Panel
Description Catalog
Number
5-Circuit Terminal Block RN5TB
Ground Bar Kits 14 hole GBK14
Ground Bar Kits 21 hole GBK21
Type CH Circuit Breakers -
Install the best. Type CH 3/4-inch
circuit breakers trip to off for
ease of operation and fewer call
backs. Breakers rated 15, 20 and
30 amperes have lugs approved
for (2) #10 through #14 wires for
more installation flexibility.
Cutler-Hammer Type CH breakers
also carry a lifetime warranty –
the best in the industry.
FIRE-GUARD
TM
Arc Fault
Protection – The first circuit
breaker with a brain to detect
arcing faults, a common cause of
many home electrical fires. So
well regarded, the 2002 National
Electrical Code
®
has required Arc
Fault Circuit Interrupters (AFCI)
be installed in 15 and 20 amp
bedroom outlet circuits for new
construction. However, the
safety benefits of the AFCIs are
amplified when used in older
homes, which may already
contain unknown arcing.
Whole Home Surge Protection
-You have two choices when
implementing surge protection
for the entire home.
1. The Whole Home Surge
Protector (CHSP 3-Way™)
offers standard protection
for all home electronic
equipment and installs
easily and cleanly into a
renovation loadcenter.
With a surge current rating
of 40kA, it protects AC
power lines, up to 4
telephone lines, and 1
cable/satellite feed.
2. The CHSP Ultra™ is the
most advanced AC surge
suppression product to
date. Along with the
following accessories:
• SurgeTel™ protects
four telephone and
modem lines.
• SurgeCable™ protects
two cable and/or satellite
TV lines.
• SurgeEthernet™
provides innovative
protection for high speed
Internet service. It can be
mounted on the sides,
top, or bottom of a
renovation loadcenter.
Dry Wall Bracket
Do you hate dealing with dry
wall repair? You can install and
move on when you use Cutler-
Hammer Dry Wall Brackets. This
additional trim covers dry wall
gaps and makes your installation
look cleaner than ever. Provides
a two-inch overhang beyond the
flush cover.
Get more work and more
revenue by specifying
Cutler-Hammer renovation
products and services by
Eaton Corporation. You’ll
encourage add-on callbacks
when you differentiate yourself
with true renovation solutions.
UL is a federally registered trademark of Underwriters
Laboratories Inc. The National Electrical Code and NEC
are registered trademarks of the National Fire Protection
Association, Quincy, Mass.
Breakers & Accessories
Ordering Information
(order covers
separately)
2 EATON CORPORATION
Cutler-Hammer
3
EATON CORPORATION Cutler-Hammer
4
EATON CORPORATION Cutler-Hammer






