Specification Sheet

ff
Description
Battery Operated
(2) CR2025 Batteries
Design features
•
With the award-winning ASPIRE Design System aesthetics, Aspire
RF devices match perfectly with any ASPIRE installation
•
Blue LED displays as follows during sent command:
- ON — comes on for 2 seconds
- OFF — blinks once
- No Response — blinks six times
•
Includes single-gang wallplate (9521) mounting hardware
(2 drywall screws and anchors, and 2 pieces of two-sided tape
strips) and two CR2025 batteries
•
Electro-mechanical push pad for ON/OFF operation with separate
Dim/Bright bar
•
Can be used in existing or new multi-gang installations with use of
inner wallplate (RFBS22)
•
Compatible with Eaton’s Z-Wave devices for wireless 3-way
control, eliminating the need for traditional 3-way wiring or for a
dedicated traveller wire
•
Single button programming
•
Mounts to any flat surface
•
Can be associated with up to five other devices
•
Goes into Sleep Mode to reduce power consumption & extend
battery life (LED is OFF)
RF9500 w/ wallplate
Table 1. Aspire RF Battery Operated Switch/Dimmer
Project Name: Prepared By:
Project Number: Date:
Catalog Number: Type:
Compliances, specifications and availability are subject to change without notice.
Catalog No. Description Color Suffix
RF9500__ Battery Operated Switch/Dimmer AW, DS, SG, WS
RFBS22__ Inner Wallplate for Multi-Gang Installation
—
RF9500
Battery Operated Switch/
Dimmer
Technical Data
Effective October 2017