User manual

For more information visit: www.EatonElectrical.com

Inputs/Outputs, EZ700/800/EZD Operating Mode

MN05013001E36

“Inputs 3 bytes” module:

operating mode, S1 – S8

The normal PROFIBUS-DP master data exchange with the

EZ204-DP slave is via input data bytes 0, 1, 2.

Requirement:

The “Inputs, 3 bytes” module must have been selected.

The master reads bytes 0, 1, 2 for the following data:

Table 1: Byte 0: Operating mode

Example:

Byte Meaning Value

0 Scan the operating mode

J Table 1

1 Scan status of the EZ outputs S1 to

J Table 2

2 Not assigned

hex

The output data and control commands can now only be

used if you have selected the appropriate modules as well.

EZ/EZD operating mode Bit

7 6 5 4 3 2 1 0

Stop/Run

with debounce 0 0 0 1 0 0 0 0/1

without debounce 0 0 1 0 0 0 0 0/1

Value 21

hex

EZ/EZD is in Run mode and is working with input

debounce.