User manual

Read/write function block data
For more information visit: www.EatonElectrical.comMN05013001E 163
Table 97: Index 0 – Bit IO
Table 98: Index 1 - Mode
Bit 7 6 5 4 3 2 1 0
FB input Data 1 – – – – – – – T
1
FB output Data 3 – – – – – – – Q1
2
1) Trigger coil. The appropriate Reset is executed if the coil is
triggered (with a rising edge).
2) Status 1 if the trigger coil MR..T is 1.
Data 1
(hex)
00 Q Outputs Q.., *Q.., S.., *S.., *SN.., QA01 are
reset to 0. * depending on the NET-ID
01 M The marker range MD01 to MD48 is reset to 0.
02 ALL Has an effect on Q and M.