User manual

For more information visit: www.EatonElectrical.com
Wiring with EZ
MN05013003E80
Saving and loading circuit diagrams
There are two ways of saving circuit diagrams in EZ
externally:
• By saving to a memory card
• By saving to a PC running EZSoft.
Once they have been saved, programs can be reloaded into
EZ, edited and run.
All circuit diagram data is saved in EZ. In the event of a power
failure the data will be retained until the next time it is
overwritten or deleted.
Memory card
Each EZ-M-32K memory card contains a circuit diagram
which is inserted into the EZ interface. The program is stored
retentively on the memory card.
The way the memory card works and a description of how to
transfer a program to the card is given in section “Memory
card” on page 244.
EZSoft
EZSoft is a PC program with which you can create, store, test
(simulate) and manage EZ circuit diagrams.
Completed circuit diagrams are transferred between your PC
and EZ via the connecting cable. Once you have transferred
a circuit diagram, simply run EZ straight from your PC.
Details on the program and transferring circuit diagrams are
given in section “EZSoft” from page 248.
Working with contacts and
relays
In EZ circuit diagrams, the switches, buttons and relays of
conventional circuit diagrams are connected up using input
contacts and relay coils.
EZ500_700.book Page 80 Tuesday, May 3, 2005 5:15 PM