User manual

For more information visit: www.EatonElectrical.com
EZ Settings
MN05013003E222
Activating RUN mode
Displayed as EZ
RUNMODE å, this means that EZ will start
in RUN mode when the power supply is switched on.
XOtherwise select RUN MODE and press OK.
RUN mode is activated.
XPress ESC to return to the Status display.
Deactivating RUN mode
XSelect
RUN MODE å. Press the OK button.
The RUN mode function is deactivated.
EZ is factory set with the display showing
RUN MODE å,
which means that EZ starts in RUN mode when the power
supply is switched on.
Table 32: Startup behavior
Behavior when the circuit diagram is deleted
The setting for the startup behavior is an EZ device function.
When the circuit diagram is deleted this does not result in the
loss of the setting selected.
Behavior during upload/download to card or PC
When a valid circuit diagram is transferred from EZ to a
memory card or the PC or vice versa, the setting is still
retained.
DEBOUNCE åÆ
P BUTTONS
RUN MODE å
CARD MODE æ
DEBOUNCE åÆ
P BUTTONS
RUNMODE å
CARD MODE æ
Startup behavior Menu displayed Status of EZ after
startup
EZ starts in STOP mode RUN MODE EZ is in STOP mode
EZ starts in RUN mode
RUN MODEå EZ is in RUN mode
J
The EZ models without a display can only be started in RUN
mode.
EZ500_700.book Page 222 Tuesday, May 3, 2005 5:15 PM