User manual

Activating debounce (input delay)
For more information visit: www.EatonElectrical.comMN05013003E 219
The input delay (debounce) is set with the DEBOUNCE menu
item.
Activating debounce (input delay)
If a tick
å is next to DEBOUNCE; this means that the
Debounce function has been switched on.
If this is not so, proceed as follows:
XSelect
DEBOUNCE and press OK.
Debounce mode will be activated and the display will show
DEBOUNCE å.
Press ESC to return to the Status display.
Deactivating debounce (input delay)
If EZ is showing
DEBOUNCE in the display, this means that
Debounce mode has already been deactivated.
XOtherwise select
DEBOUNCE å and press OK.
If Debounce mode is deactivated the display will show
DEBOUNCE.
J
If EZ is password-protected you cannot open the System
menu until you have “unlocked” it.
DEBOUNCE Æ
P BUTTONS
RUN MODE
CARD MODE æ
DEBOUNCE åÆ
P BUTTONS
RUN MODE
CARD MODE æ
J
How EZ input and output signals are processed internally is
explained in section “Delay times for inputs and outputs”,
from page 234.
EZ500_700.book Page 219 Tuesday, May 3, 2005 5:15 PM