User manual

For more information visit: www.EatonElectrical.com

EZ Settings

MN05013003E218

Activating debounce

(input delay)

Input signals can be evaluated by EZ with an input delay. This

enables, for example, the trouble-free evaluation of switches

and pushbutton actuators subject to contact bounce.

High-speed counter functions are evaluated independently of

the debounce function.

In many applications, however, very short input signals have

to be monitored. In this case, the debounce function can be

switched off.

XPress DEL and ALT to call up the System menu.

XSelect the SYSTEM menu.

Behavior for summer time end on 01.01.

If 01.01. is selected for the end of summer time, ensure the

following:

The DST time minus the time difference should not go into

31.12. Otherwise the time will continue to run until the set

time minus the time difference is 0:00 on the 01.01. The

time will then continue to run with 0:00.

Setting the time manually within the summer time end

setting:

At 3:00 on summer time end the time is to be put back by

one hour to 2:00.

The clock is set at 1:30 to 3:05. EZ will interpret this as 3:05

winter time. A time change will not be carried out.

Factory setting:

Debounce is activated.

EZ500_700.book Page 218 Tuesday, May 3, 2005 5:15 PM