User manual
High-speed counters, EZ-DA, EZ-DC
For more information visit: www.EatonElectrical.comMN05013003E 125
In the parameter display of a counter relay you change the
mode, the setpoint and the enable of the parameter display.
Value range
The counter relay counts between 4 and 1000 [Hz].
Parameter display in RUN mode:
Retention
Setting retention on the frequency counter serves no purpose
since the frequency is continuously remeasured.
Current setpoint, constant (0309)
# Contact has not switched.
รข Contact has switched.
Actual value (0153)
C
15
F+
S 00200
# C:00153
EZ500_700.book Page 125 Tuesday, May 3, 2005 5:15 PM