Operator`s manual

   
Powerware Plus 18 Operator'sManual(LTM-1336B)14
Menu Button
Press the Menu button to return to previous menu level. If you are not sure which menu
is currently displayed, press the Menu button repeatedly until the Main Menu displays
1. UPS Status.
Select Button
Selects the currently displayed item shown on the second line of the LCD Display or
enters the next menu level. For example, if the display shows MAIN MENU on the top
line and 2. Meters on the second line, pressing the Select button enters the Meters
menu and shows the INPUT VOLTS (L-N) option.
Up or Down Arrow Buttons
Changes the cursor position within the menus, status screen, or event queue. For
example, if the display shows MAIN MENU on the top line of the LCD Display and
1. UPS Status on the second line, press the down arrow button to move to the next
menu item, 2. Meters.
Right or Left Arrow Buttons
Shows possible device settings in menus and scrolls through the screen messages; or
moves the cursor position when entering the password or the date and time. For
example, if the LCD Display shows Password on the top line and A
AAAAA on the
second line, press the right arrow button to move the cursor one position to the right
(AA
AAAA).
See UPS Control Panel Functions" on page 7 for information on the Normal, Bypass,
OnĆBattery, and Overload indicators.
Using the Front Panel Display
You can use the front panel display to set up and monitor the UPS. The display has a
Main Menu and a System Setup menu with several userĆselectable options.
The Main Menu
The Main Menu contains the following options:
 1. UPS Status
 2. Meters
 3. Alarm Queue
 4. Active Alarms
 5. Battery Data
 6. SW Version
 7. System Setup
Use the up and down arrow buttons to display the Main Menu options. Press the Select
button to enter one of the submenus.