User guide

A PPENDIX E: D EVICE S ETUP W IZARD 79
6. Decide whether you want to select an auto configuration protocol or give the Revelation PDU
a static IP address.
− Auto configuration To auto configure the Revelation PDU, select either DHCP or
BOOTP from the drop-down list in the IP auto configuration field.
− Static IP address To set a static IP address, select None from the drop-down list in the
IP auto configuration field, and then type the IP address, subnet mask, and gateway
address in the corresponding fields.
When you are finished, click Next. A concluding Wizard window appears.
Figure 81 Concluding Wizard Window
7. Click Finished. The Revelation PDU is configured and ready for use. You are returned to the
Device Search and Setup window (Figure 77). You can now close the Wizard.