User guide

C HAPTER 4: U SING THE W EB I NTERFACE 51
Figure 61 Reset Confirmation Window
3. Make sure you really want to reset the Revelation PDU, and then click Really Reset. If you
change your mind, click Cancel to terminate the reset operation. If you choose to proceed
with the reset, the window shown below appears and the reset takes place. The reset takes
about one minute to complete.
Figure 62 Reset Conclusion Window
4. When the reset is complete, the Login window is displayed, and you can log back into the
Revelation PDU.
! 2 
Aphel will notify customers when new firmware is available to update the Revelation PDU.
Customers will be given instructions where to go to download the new firmware. Once the
firmware is downloaded onto a PC, you can install it on the Revelation PDU from the Web
interface. To do this:
1. Select Maintenance, and then select Update Firmware. The Firmware Upload window
appears.
Figure 63 Firmware Upload Window