User guide

C HAPTER 4: U SING THE W EB I NTERFACE 49
Figure 57 LAN Interface Settings Panel
2. To change the interface speed, select the speed you want from the drop-down list in the
LAN
Interface Speed field. Your choices are:
−
Autodetect (system selects optimum speed)
−
10 Mbps
−
100 Mbps
3. To change the duplex mode, select the mode you want from the drop-down list in the LAN
Interface Duplex Mode field. Your choices are:
− Autodetect (system selects optimum mode)
− Half duplex
− Full duplex
Half duplex allows data to be transmitted to and from the Revelation PDU, but not at the
same time. Full duplex allows data to be transmitted in both directions at the same time.
4. When you are finished, click Apply. The settings are modified.
%- 
You can set the internal clock on the Revelation PDU manually, or you can link to a Network
Time Protocol (NTP) server and let it set the date and time.
1. Select Device Settings, and then select Date/Time. The Date/Time Settings window appears.
Figure 58 Date/Time Settings Window