User guide

C HAPTER 4: U SING THE W EB I NTERFACE 37
Figure 38 Outlet Details Window
2. Select an outlet from the drop-down list in the Show details of outlet field. The window
shows these details about the outlet:
− Outlet name
− Outlet status
− RMS current, voltage and power readings, including:
 RMS current
 RMS max current
 RMS voltage
 True RMS current
 RMS power
 Real RMS power
Note: To display the Outlet Setup window, click the [Setup] link. Refer to Figure 37 for a picture
of the window.
'2 $.
To turn an outlet off and on:
1. Select Power Ports, and then select Outlet Details. The Outlet Details window appears
(Figure 38).
2. Select an outlet from the drop-down list in the Show details of outlet field. The outlet must
be ON.
3. Click Cycle. The outlet turns OFF and then back ON.
Note: The length of time between the off and on states in a power cycle can be set of the
Revelation PDU as a whole, and for individual outlets. Refer to “Setting the Revelation PDU
Thresholds