User`s guide

Eaton 9355 Parallel UPS (10/15 kVA) User's Guide S 164201601 Rev B www.eaton.com/powerquality
41
Chapter 6 Installing Options
This section describes the Powerware Hot Sync CAN Bridge Card.
For other options, such as additional X-Slot
®
cards, LanSafe
®
Power
Management Software, remote emergency power-off (REPO), relay
output contacts, or programmable signal inputs, refer to the Eaton 9355
UPS (10/15 kVA) User's Guide.
Figure 33 shows the location of the communication options and control
terminals on the UPS.
1
2
1
2
1
2
1
2
1
2
3
DB-9 Communication Port
REPO (normally closed)
REPO (normally open)
Signal Input 2
Signal Input 1
X-Slot Communication Bay #2
X-Slot Communication Bay #1
Relay Output Contacts
Signal Input 2
Wiring
Figure 33. Communication Options and Control Terminals