User`s guide

Getting Started
Eaton Power Xpert Gateway PXGX UPS Card User’s Guide 164202123—Rev 1 4
5. Slide the card into the open slot and secure with the screws removed in Step 2 (see Figure 2 and
Figure 3).
Figure 2. Install the PXGX UPS Card
6. Connect an active Ethernet cable (not supplied) to the Upstream Ethernet connector on the PXGX UPS
Card (see Figure 3).
7. If you are connecting to another PXGX UPS Card or other Ethernet device, connect an Ethernet cable (not
supplied) to the Downstream Ethernet connector on the PXGX UPS Card.
Figure 3. Secure the Card and Install the Ethernet Cable
Power Xpert Gateway PXGX UPS
EMP Upstream Downstream
100100 Act Act Setup
Restart
Status DHCP Ident Power
Power Xpert Gateway PXGX UPS
EMP Upstream Downstream
100100 Act Act Setup
Restart
Status DHCP Ident Power
Optional Second Ethernet Cable Connected
to a Downstream Network Device