User`s guide

Operation and Maintenance
Eaton Power Xpert Gateway PXGX UPS Card User’s Guide 164202123—Rev 1 40
System Log
The system log contains the history of the gateway administration activity. To generate a system log:
1. Select System Log from the Logs menu.
2. To limit the number of records, enter one or more of the following optional values:
a. Maximum number of records to return
b. Start Date
c. End Date
3. Click View log.
4. Select a name and location for the file (if prompted to save).
Erasing a Log
To erase a data, interval, event, or system log:
1. Click Erase log from the Data Log, Interval Log, Event Log, or System Log page.
2. Click OK to erase the log; otherwise, click Cancel.
Upgrading the Card's Firmware
The card's firmware can be updated by downloading the appropriate file from www.eaton.com/powerxpert.
During the upgrade process, the PXGX UPS Card does not monitor the UPS status.
To upgrade the firmware:
1. Select Firmware from the Configuration menu.
2. Select the Reboot when complete check box to automatically reboot after updating the firmware.
Note: If the Reboot when complete check box is not selected, you will be prompted to select Reboot
when the update is done.
3. Click Browse.
4. Download the pxgx_ups_xxx.rom firmware file, available on the Web at www.eaton.com/powerxpert.
The Web page reloads when the firmware upgrade is complete.