User`s guide

Operation and Maintenance
Eaton Power Xpert Gateway PXGX UPS Card User’s Guide 164202123—Rev 1 39
Generating Log Files
Note: Log files are comma-separated values (*.csv) files that can be opened using Microsoft Excel
®
software. Some computer configurations automatically open the files with the Microsoft Excel
software instead of prompting you to save the file. Excel may default to a date format specific to the
country the product is being used in, overriding the card specified format.
Data Log
The data log contains a history of the data value changes recorded by the gateway. To generate a data log:
1. Select Data Log from the Logs menu.
2. To limit the number of records, type or select one or more of the following optional values:
a. Maximum number of records to return
b. Start Date
c. End Date
3. Click View log.
4. Select a name and location for the file (if you chose to save the file when prompted).
Interval Log
The interval log contains a set of samples of data values taken at regular intervals by the gateway. To generate
an interval log:
1. Select Interval Log from the Logs menu.
2. Select the name of the device.
3. Select the interval (5, 15, or 60 minutes).
4. To limit the number of records, type or select one or more of the following optional values:
a. Maximum number of records to return
b. Start Date
c. End Date
5. Click View log.
Note: The Output KW Hours is recorded on the Interval Log. Because the Output KW Hours is reset to zero
when the card is restarted, Eaton recommends that this feature not be used for billing purposes. If
you choose to use this value for billing purposes, record the Output KW Hours before restarting the
card.
6. Select a name and location for the file (if you chose to save the file when prompted).
Event Log
The event log contains a history of the events recorded by the gateway. To generate an event log:
1. Select Event Log from the Logs menu.
2. To limit the number of records, enter one or more of the following optional values:
a. Maximum number of records to return
b. Start Date
c. End Date
3. Click View log.
4. Select a name and location for the file (if prompted to save).