User`s guide

Configuring the Card
Eaton Power Xpert Gateway PXGX UPS Card User’s Guide 164202123—Rev 1 35
10. If the humidity alarm remains active for a specified amount of time, you can signal the NetWatch clients to
shut down. To specify the amount of time, set the seconds for the humidity alarm in the OS Shutdown
Delay. Enter 1 to 600 seconds (1 second to 10 minutes) to enable the shutdown. The default is 0, which
means the NetWatch clients will not be shut down.
11. Click Apply and then OK to save the settings.
Saving and Restoring Configuration Settings
You can create a backup of the PXGX UPS Card settings and restore them at a later date.
Creating a Backup
To create a backup:
1. Select Save and Restore from the Configuration menu.
2. To save the PXGX UPS Card settings and preferences, click Save gateway configuration.
The card exports an XML file containing the PXGX UPS Card configuration settings.
3. Click Save and enter a file name and location to save the XML file.
4. If a blank browser window remains open, close it.
Restoring a Backup
Note: Restoring configuration settings overrides all changes made to the configuration settings since the
backup file was created.
To restore the configuration settings from a backup file:
1. Select Save and Restore from the Configuration menu.
2. Click Browse to select the file name and then click Open.
3. When prompted, confirm that you want to override the configuration settings with the backup file. Click
OK or Cancel.
4. Update the Web page if the Device Data does not automatically display after the backup is complete.