System information

2.4-4
For more information visit: www.eaton.com CA08104001E
February 2009
Power Management Systems & Products
i
ii
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Sheet 02
Powerware X-SLOT Connectivity Options
Technical Specifications
036
Technical Specifications
Table 2.4-2. The Power Xpert Gateway Series 2000 Card Kit Includes
Note: Features and specifications listed in this document are subject to change without notice and represent the maximum capabilities of
the software and products with all options installed. This is not a complete feature list. Features and functionality may vary depending on
selected options.
Power Xpert Gateway Series 2000 Card
Ethernet Cable
Local Configuration Cable
Quick Start Guide
Ordering Information
Catalog Number PXGX 2000
Style Number 103005868-5591
Description Power Xpert Gateway Series 2000 Card for use with Powerware UPSs
Devices Supported
Powerware uninterruptible power supplies with X-Slot  compatibility; these include the Powerware 5115 RM, 5125, 9125, 9140, 9155, 9315, 9355, 9330, 9390,
9395, BladeUPS 
Communication Ports
Ethernet Ports Two independent RJ45 ports: supports 10/100Base-T for redundant network configurations
Serial Ports
One RJ45 console port: supports local configuration and optional connection to an Environmental Monitoring Probe (EMP)
Communication Protocols Supported
Web Server Supports data access from Web browsers (HTTP and HTTPS)
Modbus TCP/IP Supports data access from Modbus TCP clients
SNMP Supports common network management tools
SMTP Supports email notification
NTP Supports time synchronization via an NTP server for card and UPS synchronization
DHCP Supports automatic IP address assignments, if enabled
Supported MIBs
Eaton Power MIB
RFC 1628 UPS MIB
Eaton EMP MIB
Eaton alarms and traps MIB
RFC 4133 Entity MIB
RFC 4268 Entity State MIB; RFC 4268 Entity State MIB Part 2
RFC 1213 MIB II
Web Browsers Supported
IE
Mozilla Firefox
Physical Characteristics
Dimensions 12 cm x 11.4 cm x 3.9 cm (4.7” x 4.5” x 1.5”)
Weight 200 grams (7.0 oz)
Environmental Specifications
Ambient Operating 0 to +40°C (32 to 104°F)
Relative Humidity 10 to 80%, non-condensing
Altitude 10,000 ft
Enclosure Rating Indoor use only
Mounting Configuration
X-Slot form factor fits directly into UPS chassis
Power Supply
Nominal Input Voltage 12 Vdc, unregulated (provided by UPS)
Input Voltage Range 8 – 25 Vdc, unregulated
Power Consumption
2.0 Watts
Regulatory/Standards Compliance
FCC Part 15, Class A
CISPR 22, Class A
ROHS Compliant
Telecom Conducted via EU Standard EN 55022:1988+A1:2000+A2:2003, Class A/EN55022:1988+A1:2000+A2:2003