System information

2.2-8
For more information visit: www.eaton.com CA08104001E
February 2009
Power Management Systems & Products
i
ii
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Sheet 02
Network Connectivity
Technical Specifications
016
Technical Specifications
Table 2.2-4. PXG Part Numbers
Memory
■ Flash: 128 MB
■ RAM: 64 MB
Communication Ports
■ Network Port: one 10/100Base-T
RJ-45 connector
■ Configuration Port: one USB port
■ Serial Ports PXG 400
❑ One dedicated RS-485 port for
connection to INCOM devices
❑ One RS-485 port for connection
to either QCPort or Modbus RTU
devices
■ Serial Ports PXG 600
❑ One dedicated RS-485 port for
connection to INCOM devices
❑ One RS-485 port for connection
to either QCPort or Modbus RTU
devices
❑ One RS-485 or RS-232 (software
selectable) port for connection
to either QCPort or Modbus RTU
devices
Network Protocols Supported
■ Modbus TCP/IP: Supports data
access from Modbus
TCP clients
■ Web Server: Supports data access
from Web browsers (HTTP and
HTTPS)
■ DHCP: Supports automatic IP
address assignments, if enabled
■ SNMP: Supports common network
management tools
■ NTP: Supports time synchronization
via a network time server for PXG
synchronization
■ SMTP: Supports mail server for
e-mail notification
Serial Protocols Supported
■ INCOM
■ QCPort
■ Modbus RTU
Supported Devices
Refer to www.eaton.com/powerxpert
for most current list. Call for informa-
tion on additional devices.
Web Browsers Recommended
■ IE 6.0
■ Mozilla Firefox 2.0
Number of Devices Supported
■ PXG 400
❑ 64 Total with INCOM Port + COM
1 Port not to exceed 64. Port
limitations are as follows:
– INCOM Port: Up to 64 INCOM
devices
– COM 1 Port: Up to 32 QCPort or
Modbus RTU devices
■ PXG 600
❑ 96 Total with INCOM Port + COM
1 Port + COM 2 PORT not to
exceed 96. Port limitations are
as follows:
– INCOM Port: Up to 64 INCOM
devices
– COM 1 Port: Up to 32 QCPort or
Modbus RTU devices
– COM 2 Port: Up to 32 QCPort or
Modbus RTU devices
Description Style
Number
Catalog
Number
Power Xpert Gateway 400 66D2145G01 PXG400
Power Xpert Gateway 600 66D2146G01 PXG600
Power Supply — 24 Vdc ELC-PS02 ELC-PS02
Low Profile Mounting Bracket Kit 66B2146G01 PXGACC01
Power Input
■ Input voltage, nominal:
24 Vdc; 0.8 A
■ Input voltage range:
+/- 20% Nominal
Power Consumption
■ 8 watts maximum
Operating Temperature
■ 32 to 140°F (0 to 60°C)
Ambient Storage Temperature
■ -40 to 185° F (-40 to 85° C)
Relative Humidity
■ 5 to 95% non-condensing at 50° C
Size (H x D x L) in Inches (mm)
■ 2.1 x 4.5 x 8.9 (53.3 x 114.3 x 226.1)
Weight
■ 1.5 pounds
Regulatory and Standards Compliance
■ UL 508, Standard for Programma-
ble Controller Equipment.
■ FCC, Class A, Part 15, Subpart B,
Sections 15.107b & 15.109b.
■ EN55022: 1994 Class A, Information
Technology Equipment.
■ EN 61000-6-2:2001 Electromagnetic
Compatibility (EMC) Party 6-2:
Immunity for Industrial
Environments.
Note: Features and specifications listed in
this document are subject to change with-
out notice and represent the maximum
capabilities of the product with all options
installed. Although every attempt has been
made to ensure the accuracy of information
contained within, Eaton makes no represen-
tation about the completeness, correctness
or accuracy and assumes no responsibility
for any errors or omissions. Features and
functionality may vary depending on
selected options.