User`s guide

Volume 3—Power Distribution and Control Assemblies CA08100004E—November 2013 www.eaton.com V3-T9-33
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.3
Metering Devices, Protective Relays, Software and Connectivity
Metering Devices
Power Xpert Meter Profiler—Free Download
The Power Xpert Meter
Profiler software allows you
to compare “expected”
energy consumption patterns
to present usage and flag
areas of concern. It is also a
predictor. It can predict what
energy consumption would
be expected later in a day.
Event Triggers
The Power Xpert Meter
4000/6000/8000 supports
five types of configurable
event triggers:
●
Out of limits (4000/6000/
8000)
●
Demand overload (4000/
6000/8000)
●
Sub-cycle disturbance
(4000/6000/8000)
●
ITIC (6000/8000)
●
Fast transient (8000)
These triggers permit pickup,
reset and pickup delay to
be configured by the user.
When a trigger occurs,
actions include Performance
Monitoring (#9’s analysis),
Capturing Waveform, Capture
Parameters, Send Email and
Operate a Relay Output. The
Graphic Display flashes an
LED to annunciate the alarm
condition. An audible alarm is
also available.
Trigger options include:
●
Out of limits: over
100 triggers
●
Demand overload:
10 triggers
●
ITIC: 8 triggers
●
Fast transient: dV/dT and
absolute per phase
●
Sub-cycle disturbance—
dV/dt and absolute
Event Logging
The optional Power Xpert
Meter 4000/6000/8000
Local graphic display or the
embedded Web server both
allow the user to view a list of
triggered events along with
any captured parameters,
event details and triggered
waveforms. In addition, a
separate event log includes a
variety of activities including
acknowledged triggers, new
min. and max. events, and
system operations such as
resets. The size of the event
log is virtually unlimited based
only on the memory option
selected.
E-mail Notification
With the optional LAN/WAN
Ethernet Communication
Expansion Card (CEC)
attached to the Power Xpert
Meter 4000/6000/8000’s, the
users can easily configure
the meters to send periodic
emails at user-defined
intervals for energy
consumption and power
demand. Emails contain a
summary of readings per
rate structures and also have
the actual measurements
attached to the email’s
body as a CSV file in a ZIP
container. Prompt alarm
emails can also be sent for
any event condition either
standard in the meter or ones
set up by the user based on
thresholds, dV/dt triggers or
IO status changes with the
optional IO Card. Alarm
emails can be configured
to have the COMTRADE
waveform capture attached
to the e-mail’s body.
Periodic Email Message