User`s guide

Volume 3—Power Distribution and Control Assemblies CA08100004E—November 2013 www.eaton.com V3-T9-29

9.3

Metering Devices, Protective Relays, Software and Connectivity

Metering Devices

Metering Selection Chart, continued

Note

Optional.

Legend: PG = Programmable

FS = Full scale

RV = Read value

Device Name

Accessories

See Page V3-T9-131

Power Xpert

Multi-Point Meter

IQ Energy

Sentinel

Section Page Number V3-T9-100 V3-T9-112

Other Features

Storage 256 MB standard, 2 GB optional —

PG output relays 1 standard, 8 each module

—

Discrete contact inputs 3 standard, 8 each module

—

Analog inputs — —

Synch-input kW utility Via communications and digital input Via communications only

Auxiliary voltage — —

kWh pulse initiator Aggregate or main-digital output, LED output on meter

modules (accuracy check)

—

Waveform display — —

Waveform capture — —

Frequency distribution display — —

Display type LCD color touchscreen

—

Display lines/character 6-inch diagonal —

Display character height Graphics —

Communications Serial: Modbus RTU

Network: Modbus TCP, BACnet/IP, Ethernet TCP/IP,

HTTP, HTTPS, SNMP, SMTP, SFTP

Serial: INCOM

Network: via Power Xpert Gateway

Setup configuration Via PXMP configuration software Via configuration software

Dimensions Refer to TD150006EN (see Page V3-T9-110) Refer to TD1707TE

Operating temperature range –20° to 70°C –25° to 70°C

Reference literature TD150006EN —