User`s guide

Volume 3—Power Distribution and Control Assemblies CA08100004E—November 2013 www.eaton.com V3-T9-287
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.5
Metering Devices, Protective Relays, Software and Connectivity
Connectivity Options
Contents
Description Page
Power Xpert Gateways . . . . . . . . . . . . . . . . . . . . . . V3-T9-259
Power Xpert Ethernet Switches . . . . . . . . . . . . . . . V3-T9-272
Power Xpert Gateway
Series 1000 Card—Power Distribution Unit . . . . . . V3-T9-276
Power Xpert Gateway
Series 2000 Card—Uninterruptible Power Supplies V3-T9-279
mMINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-282
MINTII RS-232 Converter. . . . . . . . . . . . . . . . . . . . V3-T9-284
IPONI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-285
DPONI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-286
MPONI
I/O Devices Digital Input Module (DIM) . . . . . . . . . V3-T9-288
Addressable Relay II. . . . . . . . . . . . . . . . . . . . . . . . V3-T9-290
Breaker Interface Module II (BIM II) . . . . . . . . . . . V3-T9-293
Sub-Network Master Local Display (SMLD) . . . . . . V3-T9-297
IMPCABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-299
MPONI
Product Description
The MPONI Product Operated
Network Interface card, or
MPONI card, enables Modbus
communication capability to
various Eaton products. Each
MPONI contains two rotary
address switches to uniquely
identify each device on the
network and a baud rate DIP
switch. A 5-pin connector is
provided for wiring to the
RS-485 network. Various
baud rates are available for
networking flexibility, and
onboard LEDs indicate
operation, error and
communication status.
The MPONI is applied where
a device network exists
connected by a dedicated
shielded twisted pair
conductor. Modbus RS-485
allows a single device or
multiple units in a daisy-chain
configuration to communicate
with another local or remote
device and may extend up to
4000 feet (1219m) without a
repeater. The MPONI comes
with mounting hardware and
attaches to the back of its
associated device.
Note: Please see IL for detailed
register support information for
each supported product. Not all
device functionality is supported
with the RS-485 PONI over the
Modbus Protocol.
Features
MPONI
Product Selection
MPONI
Network Connection
(Green Phoenix
Connection)
Recommended
18 gauge twisted pair IMPCABLE or
20 gauge Belden 9463 class
Address
Selector
Switches
Function
Selector
Switch
IQ Host
Device
Connection
LED
STATUS
RX
TX
RS-485
NETWORK
1 = A
2 = G
3 = COMMON
4 = SHIELD
5 = CHASSIS
RS-485
P roduct
O perated
N etwork
I nterface
LED
Description
Catalog
Number
Modbus Product Operated Network Interface Card MPONI