User`s guide

V3-T9-282 Volume 3—Power Distribution and Control Assemblies CA08100004E—November 2013 www.eaton.com
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.5
Metering Devices, Protective Relays, Software and Connectivity
Connectivity Options
mMINT Module
Contents
Description Page
Power Xpert Gateways. . . . . . . . . . . . . . . . . . . . . . V3-T9-259
Power Xpert Ethernet Switches . . . . . . . . . . . . . . . V3-T9-272
Power Xpert Gateway
Series 1000 Card—Power Distribution Unit . . . . . . V3-T9-276
Power Xpert Gateway
Series 2000 Card—Uninterruptible Power Supplies V3-T9-279
mMINT
Technical Data and Specifications . . . . . . . . . . . V3-T9-283
MINTII RS-232 Converter . . . . . . . . . . . . . . . . . . . V3-T9-284
IPONI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-285
DPONI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-286
MPONI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-287
I/O Devices Digital Input Module (DIM) . . . . . . . . . V3-T9-288
Addressable Relay II . . . . . . . . . . . . . . . . . . . . . . . V3-T9-290
Breaker Interface Module II (BIM II) . . . . . . . . . . . V3-T9-293
Sub-Network Master Local Display (SMLD). . . . . . V3-T9-297
IMPCABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-299
mMINT
Product Description
The mMINT (Modbus Master
INCOM Network Translator)
Module is an Eaton accessory
product that provides
communication between
a Modbus RTU network
and an INCOM (INdustrial
COMmunications) network
(see Page V3-T9-283). This
module is transparent to the
Modbus network. It
communicates to a master on
the Modbus network using
the Modbus RTU (Remote
Terminal Unit) protocol. It
communicates to slave
devices on the INCOM
network using the IMPACC
(Integrated Monitoring,
Protection, And Control
Communication) protocol.
Features
The mMINT module is a
slave device on the Modbus
network and as such requires
a master that will exchange
register objects with the
mMINT module.
●
Handles generic pass-
through commands
(Modbus/INCOM/Modbus)
●
Capable of passing
Modbus register objects
from Eaton’s existing
products and newer PnP
(Plug-n-Play) products to a
Modbus RTU master
●
Data in IEEE Floating Point
format and fixed point
●
Modbus RTU
communications data
transfer rates of 1200,
9600 or 19,200 baud with
one start bit, eight data
bits, no parity, and either
one or two stop bits
●
Up to 32 products
connected to INCOM
network port (246 unique
addresses maximum)
●
Flashing Status LED to
indicate an active module
●
LED indicators for INCOM
transmit and receive
communications
exchanges
●
LED indicators for Modbus
RS-485 transmit and
receive communications
exchanges
●
Input power for the module
from either 120 Vac or 24
to 125 Vdc
●
DIN rail mount package
●
0ºC to 60ºC ambient
operation
Standards and Certifications
●
UL
●
CSA
●
CE mark
Product Selection
The catalog number of this
product is mMINT.