User`s guide

Volume 3—Power Distribution and Control Assemblies CA08100004E—November 2013 www.eaton.com V3-T9-27
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.3
Metering Devices, Protective Relays, Software and Connectivity
Metering Devices
Metering Selection Chart, continued
Notes
1
Relays programmable to operate on any measured function.
2
Optional.
3
An IPONI is required.
4
IQ 230M only.
Legend: PG = Programmable
FS = Full scale
RV = Read value
Device Name
Accessories
See Page V3-T9-131
IQ Analyzer 6000 Series
IQ DP-4000 Series
IQ 230 Series
Section Page Number V3-T9-79 V3-T9-87 V3-T9-93
Other Features
Storage 90 KB 15 parameters —
PG output relays (4) 10A Form C
1
(3) 10A Form C
2
(2) 100 mA Form A
PG analog outputs (4) 0–10/4–20 mA — —
Discrete contact inputs (3) + 30 Vdc differential (1) kW Demand
2
(2) +30 Vdc differential
Analog inputs (1) 0–20/4–20 mA — (1) 4–20 mA
Synch-input kW Utility At device or via communications At device or via communications
2
Via communications only
Auxiliary voltage — — —
kWh pulse initiator Yes Yes
2
Yes
Waveform display Local
2
/computer — —
Waveform capture, samples/cycle Yes, 128 — —
Frequency distribution display Local
2
/computer — —
Display type Graphic LCD with LED backlight 7 Segment LED Backlit LCD
Display lines/character 7 lines, 147 characters 1 line, 7 characters 4 lines, 20 characters
Display character height Up to 7 lines 1 line 1.60 (40.6) H x.09 (2.3) W
Communications Serial: INCOM
3
Network: via Power Xpert Gateway
3
Serial: INCOM
3
Network: via Power Xpert Gateway
3
Serial: INCOM, Modbus RTU
4
Network: via Power Xpert Gateway
Setup configuration Via configuration software/display Via configuration software/display Via configuration software/display
Dimensions Refer to TD1702BTE Refer to TD1703ATE Refer to TD1706ATE
Operating temperature range –20° to 70°C –20° to 70°C 0° to 50°C
Reference literature — — —