User`s guide

V3-T9-258 Volume 3—Power Distribution and Control Assemblies CA08100004E—November 2013 www.eaton.com
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.4
Metering Devices, Protective Relays, Software and Connectivity
Protective Relays
IQ DC Power Supply
Contents
Description Page
Product Selection Guide . . . . . . . . . . . . . . . . . . . . V3-T9-158
FP-6000 Feeder Protection . . . . . . . . . . . . . . . . . . V3-T9-162
FP-5000 Feeder Protection . . . . . . . . . . . . . . . . . . V3-T9-172
FP-4000 Feeder Protection . . . . . . . . . . . . . . . . . . V3-T9-180
MP-3000 Motor Protection . . . . . . . . . . . . . . . . . . V3-T9-188
MP-4000 Motor Protection . . . . . . . . . . . . . . . . . . V3-T9-198
MD-3000 Motor/Generator Differential Relay . . . . V3-T9-204
Digitrip 3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-207
VR-300 Multifunctional Voltage Relay . . . . . . . . . . V3-T9-217
DP-300 Current Differential Protection Relay . . . . . V3-T9-221
EDR-3000 Feeder Protection . . . . . . . . . . . . . . . . . V3-T9-226
ETR-4000 Transformer Protection Relay . . . . . . . . V3-T9-237
Ground Fault Relay . . . . . . . . . . . . . . . . . . . . . . . . . V3-T9-250
Universal RTD Module . . . . . . . . . . . . . . . . . . . . . . V3-T9-254
IQ 125 Volt DC Power Supply
IQ 125 Volt DC Power Supply
Product Description
Eaton’s IQ DC Power Supply
is a DC to AC inverter module
intended for use where DC
power is available, but some
AC is required. The unit will
operate Eaton’s MP-3000, or
other AC powered IQ devices
requiring no more than 75 VA
of power at any power factor.
The IQ DC power supply is
available in two styles, one to
be used with the MP-3000
and one for all other products.
Features, Benefits
and Functions
●
Single, two-wire input—
no need to set switches
or adjust jumpers
●
Four connections—two for
DC in, two for AC out
●
AC output is isolated from
the incoming power
●
Built-in protection features
protect against short
circuits while providing
ample power to start loads
●
Sinusoidal wave
Product Selection
IQ DC Power Supply
Technical Data and
Specifications
●
Input voltage ranges from
105 Vdc to 140 Vdc
●
Rated power output—
75 VA at any power factor
●
Operating temperature—
–4ºF to 140ºF
(–20°C to 60°C)
Description
Catalog
Number
IQ DC power supply module IQDCPS
IQ DC Power Supply