User`s guide

V3-T9-182 Volume 3—Power Distribution and Control Assemblies CA08100004E—November 2013 www.eaton.com
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.4
Metering Devices, Protective Relays, Software and Connectivity
Protective Relays
The FP-4000 provides the
following metering functions:
●
Amperes (rms, phasor and
sequence)
●
Amperes demand and peak
demand
●
Volts (rms, phasor and
sequence)
●
VA and VA demand
●
Watts and kW demand
and peak demand
●
Forward/reverse/net kWh
●
VARs and kVAR demand
and peak demand
●
Lead/lag/net kVARh
●
Power factor
●
Frequency
●
Voltage and current
●
%THD and magnitude THD
●
Minimum/maximum
recording with date/time
stamp
●
Trending (load profile
over time)
The FP-4000 provides the
following monitoring and
data recording functions that
enhance the security of
the protection system and
provides useful
information
for scheduling maintenance:
●
Trip circuit monitoring
●
Close circuit monitoring
●
Loss-of-vacuum monitoring
●
Breaker wear (accumulated
interrupted current)
●
Waveform capture
(256 cycles total, up to
16 events)
●
Fault data logs (up to
16 events)
●
Sequence of events report
(up to 100 events)
●
Clock
The FP-4000 provides
standard control functions
plus user-configurable
custom control capabilities.
This logic can be used for
applications such as main-
tie-main transfer schemes.
●
Remote open/close
●
Programmable I/O
●
Programmable logic gates
and timers
●
Multiple setting groups
(up to four)
●
Bus transfer logic
The FP-4000 supports the
following communication
options:
●
Local HMI
●
Password protected
●
Addressable
●
Local communication port
●
Remote communication
port:
●
FSK
●
RS-232
●
RS-485
●
Protocols:
●
INCOM
●
Modbus
●
Configuration software
Communication Software
Eaton provides two types
of communication software.
The first is PowerPort. It runs
on a PC or laptop for easy
access to a single relay to
change set points or
configuration and to view
metered values and stored
data. PowerPort is free and
can be downloaded from
www.eaton.com; search for
‘PowerPort,’ then click the
download search result.
The second package is
PowerNet. PowerNet is a
power management software
package that is designed for
continuous, remote monitoring
of many devices. It provides
all the functionality of
PowerPort plus additional
functions such as billing,
trending and graphics.
Contact your local Eaton
representative for more
information on PowerNet
software.
PowerPort and PowerNet Protection Overview Screen