User`s guide

V3-T9-102 Volume 3—Power Distribution and Control Assemblies CA08100004E—November 2013 www.eaton.com
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.3
Metering Devices, Protective Relays, Software and Connectivity
Metering Devices
Standards and Certifications
Environmental
The PXMP Meter and current sensors must be housed in a
NEMA or UL enclosure that keeps the internal environment
within the PXMP’s environmental specification ranges and
provides suitable fire and mechanical protection in the end
product installation.
●
Temperature range: –20 to +70°C (–4 to +158°F)
●
Storage temperature range: –40 to 85°C
●
Humidity: 5–95% noncondensing environment
●
Pollution degree: II
●
Elevation: 0 to 9843 ft
(0 to 3000m)
●
Housing: IP20
●
CE Mark
●
EMC EN61326
Emissions Conducted and Radiated
●
FCC part 15 Class B
●
CISPR 11 Class B
Electromagnetic Immunity
Product Safety
●
IEC/EN61010-1
●
UL 61010-1 File E185559
●
CNL evaluation to CAN/C22.2 No 1010.1.92
Accuracy
●
ANSI C12.20—Accuracy Class 0.5% with either CSXXX or
PXMP-CSXXX sensors
●
Measurement Canada Approval Pending
Standard Description Level
EN61000-4-2 ESD 3
EN61000-4-3 RF radiated 3
EN61000-4-4 Electrical fast transient 3
EN61000-4-5 Surge 3
1
EN61000-4-6 RF conducted 3
EN61000-4-11 Volt sag/swell/variation —
Product Selection
The Power Xpert Multi-Point Meter, current sensors, and other
accessories can be ordered from Eaton distributors. Refer to the
following catalog numbers when ordering.
Power Xpert Multi-Point Meter Products
Note
Total sensor lead length must not exceed 28 ft (8.5m).
Product Description Catalog Number
Meter Bases and Meter Modules with ABCN Voltage Inputs
PXMP meter base—three-phase with ABCN voltage inputs PXMP-MB
PXMP meter module with six 100 mA inputs
for use with PXMP current sensors
PXMP-MM100MA
PXMP meter module with six 10 mA inputs
for use with IQMESII current sensors
PXMP-MM10MA
PXMP meter module with six 333 mV inputs
for use with 333 mV current sensors
PXMP-MM333MV
Meter Bases and Meter Modules with ABN Voltage Inputs
PXMP meter base—single-phase, three-wire
with ABN voltage inputs
PXMP-MB-AB
PXMP meter module with six 100 mA inputs
for use with PXMP current sensors
PXMP-MM100MA-AB
PXMP meter module with six 10 mA inputs for use with IQMESII
current sensors
PXMP-MM10MA-AB
PXMP meter module with six 333 mV inputs for use with
333 mV current sensors
PXMP-MM333MV-AB
IO Modules
PXMP meter pulse input module with eight inputs PXMP-PIM
PXMP meter digital output module with eight outputs PXMP-DOM
Communication Module
PXMP meter energy portal module PXMP-EPM
Current Sensor Kits
KIT, PXMP CS125 sensor, quantity of 3 PXMP-CS125-3
KIT, PXMP CS250 sensor, quantity of 3 PXMP-CS250-3
KIT, PXMP CS400 sensor, quantity of 3 PXMP-CS400-3
Current Sensor Cable Kits
KIT, PXMP sensor cable, 4 ft (1.2m), quantity of 3 PXMP-SC4-3
KIT, PXMP sensor cable, 6 ft (1.8m), quantity of 3 PXMP-SC6-3
KIT, PXMP sensor cable, 8 ft (2.4m), quantity of 3 PXMP-SC8-3
KIT, PXMP sensor cable, 12 ft (3.7m), quantity of 3 PXMP-SC12-3
Current Sensor Extension Cable Kits
KIT, PXMP sensor extension cable, 8 ft (2.4m), quantity of 3 PXMP-SCE-8-3
KIT, PXMP sensor extension cable, 16 ft (4.9m), quantity of 3 PXMP-SCE-16-3
Interface Modules
PXMP current sensor interface module for 333 mV, kit X 3 PXMP-IM333MV-3