User`s guide

GETTING STARTED
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
5
t
Card Details
5
1
4
6
2
3
1. Ethernet Port (10/100BaseT)
2. ACT LED (green)
3. 100M LED (orange)
4. Settings/Sensor Port
5. UPS Data LED (green)
6. RS232 LED (orange)
Figure 3. ConnectUPS-MS Card Details
Table 1. Indicator Descriptions
Ethernet Port (10/100BaseT)
ACT LED (green)
Off Card is not connected to the network
On Card is connected to the network, but no activity
Flashing Card is sending/receiving
100M LED (orange)
Off Port is operating at 10 Mbits/s
On Port is operating at 100 Mbits/s
Settings/Sensor Port
UPS Data LED (green)
Off Card is starting
On Card is communicating with the UPS
Flashing Normal operation; communication with the UPS is operational
RS232 LED (orange)
Off Configuration menu is activated
On Normal operation; Configuration menu is not activated
Flashing Card is communicating with the (EMP)