User`s guide

OPERATION AND MAINTENANCE
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
70
t
Option 1: Reset
Two options are available for resetting the card (see Figure 45):
S Hardware Reset: Equivalent to a restart of the electrical power supply.
S Restart application: Restarts only the application.
-------------------------------------------------------------
Reset
-------------------------------------------------------------
1 : Hardware Reset
2 : Restart application
0 : Exit
-------------------------------------------------------------
Figure 45. Reset Menu
Option 2: Network Configuration
The Network Configuration option displays additional options for network settings
(see Figure 46):
-------------------------------------------------------------
Network setting
-------------------------------------------------------------
1 : Read Network settings
2 : Modify Network settings
3 : Set Ethernet speed
0 : Exit
-------------------------------------------------------------
Figure 46. Network Settings Menu
Three options are available for the network settings:
S Read Network settings: To view the network settings (see Figure 47).
-------------------------------------------------------------
Network configuration
-------------------------------------------------------------
MAC address : 00.20.85:FD:1C:07
Mode : Static IP
IP address : 166.99.18.129
Subnet mask : 255.255.248.0
Gateway : 166.99.17.1
-------------------------------------------------------------
Figure 47. Read Network Settings Option