User`s guide

Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality

Chapter 4 MIB Objects

This chapter describes the Management Information Base (MIB) files available with

the card. A MIB is an information repository residing on a device in a communication

network. Network management software uses a device's MIB to manage the device.

Every manageable device on a network has a MIB consisting of one or more files that

list information about the device.

Use the facilities provided by your Simple Network Management Protocol (SNMP)

management software to access the individual MIB objects. The objects define the

information available about your UPS.

You can configure a device so that it generates a trap if a certain condition occurs,

such as an alarm clearing. The trap is sent to the management station to inform it of

the occurrence.

UPS MIB

The ConnectUPS-MS Card implements the full IETF standard UPS MIB (RFC 1628),

including the IETF alarm table. The IETF traps are implemented. Visit

www.eaton.com/powerquality or http://tools.ietf.org for a description of the MIB. The

UPS MIB access path is 1.3.6.1.2.1.33.

Eaton MIB

The ConnectUPS-MS Card implements the full Eaton MIB (PowerMIB), including

alarm tables. The Eaton traps are sent. The Eaton MIB access path is 1.3.6.1.4.1.534.

Table 11 is an abbreviated list of objects from the PowerMIB. The UPS output/load

segment controls objects and the entire MIB description is available at

http://powerquality.eaton.com/Support/SoftwareDrivers.

Table 11. PowerMIB Objects

MIB Object SNMP Format Add.path

xupsIdentManufacturer String {1.1.0}

xupsIdentModel String {1.2.0}

xupsIdentSoftwareVersion String {1.3.0}

xupsIdentOemCode Integer {1.4.0}

xupsBatTimeRemaining Seconds {2.1.0}

xupsBatVoltage Volts DC {2.2.0}

xupsBatCurrent Amps DC {2.3.0}

xupsBatCapacity Percent {2.4.0}

xupsBatteryAbmStatus Integer {2.5.0}

xupsBatteryLastReplacedDate String {2.6.0}

xupsInputFrequency 0.1 Hertz {3.1.0}

xupsInputLineBads Integer {3.2.0}

xupsInputNumPhases Integer {3.3.0}

xupsInputTable — {3.4.0}