User`s guide

INTRODUCTION
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
2
t
S Recording of events and measurements in the card log
S Connection to the card with straight Category 5 RJ-45 network cables [maximum
card distance is 20m (65 ft)]
S Easy installation—the ConnectUPS-MS Card can be installed while the UPS is
online, maintaining the highest system availability
S Compatibility with the following Management Information Bases (MIBs):
- MIB II (RFC 1213)
- Internet Engineering Task Force (IETF) Standard UPS MIB (RFC 1628)
- Eaton PowerMIB
- Eaton Pulsar MIB (MGE MIB)
See Chapter 4, “MIB Objects” on page 59.
S Secure management through SNMPv3
S Support of dual stack IP v4 / IP v6